Angle grinder dimensions vary by model and manufacturer, but are generally approximately 300-500mm long, 100-200mm wide, and 100-150mm high, weighing between 2-5kg.
Dimensions
An angle grinder is a commonly used mechanical grinding tool, and its dimensions vary slightly depending on the model. Generally, an angle grinder is approximately 300-500mm long, 100-200mm wide, and 100-150mm high, weighing between 2-5kg. Specific dimensions may vary depending on the specific product.
Machine Structure
An angle grinder consists of a motor, grinding disc, protective cover, and handle. Its simple structure makes it easy to assemble and disassemble, facilitating maintenance and component replacement.
Installation
When installing an angle grinder, first ensure the selected installation location is stable and free of obstructions. Then, place the angle grinder in the installation location, connect the power cord, and check that the switch is fully functional. During use, be careful not to damage electrical wires. Regularly clean dust and debris inside and outside the machine to ensure proper heat dissipation and a good working environment.
Usage Precautions
When using an angle grinder, pay attention to the following:
1. Confirm the operating range and speed of the grinding disc.
2. Use the protective cover during grinding to prevent the grinding disc from accidentally detaching.
3. The grinding disc must rotate in the direction indicated by the arrow.
4. Using an angle grinder for emergency cutting or sawing operations is strictly prohibited in electrical and metalworking industries.
